
Packaging & Product Protection
Corrugated plastic sheets can be converted into layer pads, liners, corrugated plastic dividers and partitions, and protective panels for handling, storage and transport.

Custom Sheets for Packaging & Industrial Fabrication
Custom corrugated polypropylene sheets and PP hollow board for reusable packaging, dividers, layer pads, boxes and industrial fabrication. Available in 2–12 mm thickness, 250–3,500 GSM, standard or custom dimensions, colors and fabrication options.
| Thickness | 2–12 mm |
|---|---|
| GSM | 250–3,500 GSM; available range varies by thickness |
| MOQ | 5,000 sheets |
| Lead Time | 10–15 days after specifications and artwork approval |
On this page, corrugated plastic sheets, corrugated polypropylene sheets, PP corrugated sheets and PP hollow board refer to our extruded polypropylene hollow-flute sheet products for packaging and industrial fabrication. This product family is also described as corrugated plastic board or fluted polypropylene sheets.
| Product | PP Corrugated Plastic Sheets |
|---|---|
| Material | Polypropylene (PP) |
| Thickness | 2–12 mm |
| Grammage | 250–3,500 GSM |
| Standard Size | 1,220 × 2,440 mm (approximately 4 × 8 ft) |
| Other Common Sizes | 1,000 × 2,000 mm; 1,200 × 2,400 mm |
| Maximum Width | 2,100–2,600 mm, depending on equipment, thickness, formulation and order specification |
| Maximum Length | Up to 12,000 mm, subject to production feasibility, finished specification, handling and logistics |
| Thickness Tolerance | Reference range ±0.1–0.3 mm; final tolerance confirmed according to order requirements |
| GSM Tolerance | ±5% |
| Structure | Extruded Twin-Wall / Hollow-Flute |
| Flute Direction | Longitudinal / Transverse |
| Colors | White / Black / Blue / Green / Red / Yellow / Custom Colors |
| Custom Dimensions | Available |
Maximum width depends on equipment, thickness, formulation and order specification. Lengths up to 12,000 mm require confirmation of production feasibility, finished specification, handling and logistics. The thickness tolerance is a reference range; final tolerance must be confirmed according to order requirements.
Thickness and GSM (grams per square metre) are related but separate specification variables. The following ranges are reference options for procurement.
| Thickness | Reference GSM Range |
|---|---|
| 2 mm | 250–450 GSM |
| 3 mm | 350–1,000 GSM |
| 4 mm | 650–1,500 GSM |
| 5 mm | 800–1,500 GSM |
| 6 mm | 1,000–1,500 GSM |
| 7 mm | 1,500–1,600 GSM |
| 8 mm | 1,600–2,500 GSM |
| 10 mm | 1,800–2,500 GSM |
| 12 mm | 2,000–3,000 GSM |
The overall available grammage range is 250–3,500 GSM. This does not mean every thickness can be produced at 3,500 GSM. Special thickness/GSM combinations are evaluated according to formulation, processing conditions and final application requirements.
Select the final specification according to rigidity, finished product structure, load, stacking, handling method, fabrication, reuse cycles, environment and formulation. Higher GSM does not automatically mean higher load capacity, and a thicker sheet does not automatically produce stronger packaging.
Use the existing GSM weight calculator to estimate theoretical corrugated plastic sheet weight by area and GSM.
| Base Resin | Polypropylene |
|---|---|
| Virgin PP | Available |
| Recycled PP | Available |
| Virgin / Recycled Ratio | Customizable |
| 100% Virgin PP | Available upon specification confirmation |
| Material Formulation | Can be adjusted according to customer requirements |
| Color Masterbatch | Available |
| Functional Additives | Available |
| Calcium Carbonate Filler | Optional, subject to formulation |
Material formulation may be adjusted for mechanical requirements, environment, color, static control, UV exposure, flame-retardant requirements and food-contact applications. Different additives and material systems may affect mechanical performance, processing and regulatory suitability. Additives cannot be assumed to combine freely; the complete formulation requires specification confirmation.
Functional performance and available documentation are confirmed according to the selected material grade and project requirements.
Low-temperature PP formulations are available for applications down to −40°C. Final performance depends on material formulation, virgin/recycled ratio, sheet specification, loading conditions and validation requirements. Evaluation should cover low-temperature impact, brittleness, folding performance, load performance and long-term stability.
UV stabilizers and UV-stabilized formulations are available for outdoor reusable packaging, agricultural packaging, outdoor product protection and prolonged light exposure. Exposure conditions and the required performance must be confirmed for the application; no fixed outdoor lifespan is specified.
| Anti-Static | 10⁶–10⁹ Ω reference range |
|---|---|
| Conductive | 10³–10⁵ Ω reference range |
Final electrical performance must be confirmed according to the required test method, resistance definition/type, environmental and testing conditions, duration of performance and performance retention requirement. These are reference specification ranges, not a certification claim. Applications may include electronics packaging, component separation, factory circulation and electronic component transport.
Flame-retardant formulations with HB and V-rated options can be developed according to customer requirements. UL94 classification references include HB, V-2, V-1 and V-0. Final classification depends on formulation, sheet thickness and actual test results; additive use alone does not establish a rating.
Food-contact suitable PP formulations can be supplied where required. SGS-tested formulations are available, subject to the scope and conditions of the applicable test report. Suitability must be confirmed for the selected formulation and intended contact conditions; it does not apply automatically to every sheet or recycled-content formulation.
Abrasion resistance is an inherent PP material property and an application characteristic to consider for repeated handling. The required performance should be assessed for the selected formulation and application.
Standard sheets are 1,220 × 2,440 mm (approximately 4 × 8 ft). Other common sizes are 1,000 × 2,000 mm and 1,200 × 2,400 mm; custom dimensions are available within the production and handling limits listed above.
Our extruded twin-wall polypropylene hollow sheet consists of two outer skins connected by continuous internal ribs/flutes. Longitudinal or transverse flute direction can be selected according to finished product dimensions, cutting direction, folding direction and structural design.

Two skins enclose the hollow-flute core. Identify the flute direction on the part drawing before planning cuts and folds.
White, black, blue, green, red and yellow are available, along with custom colors matched to customer requirements or color references. MOQ and color tolerance may depend on the order specification.
Dimensions, cutting, scoring, punching, die-cutting and printing can be customized according to the finished product. Processing options support layer pads, dividers, liners, protective panels and application-specific fabricated components.
Printing can include custom logos, text, colors and handling marks. Confirm the drawing, flute direction, folding requirements, artwork and any required surface options before production.

Sheet material positioned on a processing table. Mark cut outlines, score lines and flute direction on the part drawing.
Sheet specifications can be selected for reusable packaging, corrugated plastic boxes, bins and totes, automotive component packaging, industrial dunnage, warehouse and returnable packaging, and produce and cold-chain packaging.

Corrugated plastic sheets can be converted into layer pads, liners, corrugated plastic dividers and partitions, and protective panels for handling, storage and transport.

Custom-cut and fabricated sheets support industrial fabrication and component protection. Functional grades are selected according to project requirements. For printed sheet uses, review signs, displays and promotional applications.
PP sheet production combines resin and formulation selection with extrusion, cooling, calibration and cutting. The hollow-flute structure is formed during extrusion. For the manufacturing process and practical inspection checks, see how PP corrugated plastic sheet is made.

Material feed and processing equipment along the line. Define the required sheet specification and inspection checks before production.
Before production, confirm dimensions, thickness, GSM, material formulation, color, fabrication, artwork and functional requirements. Define acceptance checks for dimensions, thickness/GSM, cross-section, flatness, color and printing, with an approved sample where applicable. Required inspection and test documentation should be agreed for the order before shipment.
Corrugated plastic is a broader material description. On this page, both names refer to our polypropylene (PP) twin-wall hollow-flute sheets for packaging and industrial fabrication.
Available thicknesses are 2–12 mm. Select thickness together with GSM, formulation, finished product structure and application requirements.
The overall available grammage range is 250–3,500 GSM, while available GSM varies by thickness. Not every thickness can be produced at 3,500 GSM; special combinations require evaluation of formulation, processing conditions and final application requirements.
Standard size is 1,220 × 2,440 mm; other common sizes are 1,000 × 2,000 mm and 1,200 × 2,400 mm. Custom dimensions are available. Maximum width is 2,100–2,600 mm depending on equipment, thickness, formulation and order specification. Lengths up to 12,000 mm are subject to production feasibility, finished specification, handling and logistics.
Yes. Anti-static options have a reference resistance range of 10⁶–10⁹ Ω and conductive options 10³–10⁵ Ω. Final performance requires confirmation of test method, resistance definition/type, environmental and testing conditions, duration of performance and performance retention requirements.
Low-temperature formulations are available for applications down to −40°C, subject to formulation and validation. Final performance depends on virgin/recycled ratio, sheet specification, loading conditions and the required low-temperature impact, brittleness, folding, load and long-term stability checks.
Provide size, thickness, GSM, application, quantity, color, printing, flute direction if required, functional requirements and material requirements, along with destination country or port. The standard MOQ is 5,000 sheets. Lead time is 10–15 days after specifications and artwork are confirmed.
Tell us the application, sheet dimensions, thickness or GSM, required quantity, performance requirements and destination. We will recommend a suitable material grade and processing solution.